Product Description

BM-A6 automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water bottle, pesticide bottle, oil bottle, cosmetics bottle etc.

1. Features:

• Stable performance with advanced PLC.
• Conveying preforms automatically with conveyor.
• Strong penetrability and swift distribution of the heater by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
• Strong clamping force with high pressure and double crank links to lock the mold.
• Low cost, high efficiency, easy operation, easy maintenance, with automatic technological process.
• Ideal effect of the chilling with the chilling system.
• Easy installation and starting.
• Low rejection rate: less than 0.2 percent.

 

2. Full automatic control system:

1. The machine adopts the high-end computers all actions central control.
2. Material transport the use of sophisticated servo control, smooth, accurate, and fast.
3. Raw material(pre-form) delivery sealed.
4. Automatic lubrication system
5. Scrap, defective automatically deleted election system

 

3. Energy saving：

1. Bar distance and circuitous type pre-form carrier systems, energy saving 50﹪
2. Free optimization thermal radiation, reduce waste, energy saving 20﹪
3. The feeding and out bottle on the principle of gravity, reduce assistant action, the part of the save the compressed air 60﹪
4. Out bottle system can directly connected filling machine, reduce unscramble bottle machine and human, save investment 16﹪

   

4. Technique Parameter of blow molding machine:

Main part:
Pneumatic part	Valve	SMC
	Cylinder
Electric part	PLC	MITSUBISHI
	Inverter	MITSUBISHI
	Relay	OMRON
	Servo motor National	MITSUBISHI
Note	All of the electrical components adopts CE、UL、CCC approved international advanced high-tech product.

 

Model	BM-A6
Productivity	Depend on bottle design	6000-7000PCS/H
Product type	Body diameter	≤90mm
	Height	≤325mm
	Neck diameter	28mm-30mm
Mold	Cavity	6 cavities
	Mold thick	240mm
Main machine power	Electrical source power	380v 3Phase /220v 3Phase  50/60HZ
	Rated Power	53kw
	Really use power	24kw
Air source	LP air compressor	1.6m3/min 1.0MPa
	HP air compressor	3.2m3/min 3.0MPa x 2
	Air dryer	6.0m3/min 3.0MPa
Cooling water	Cooling water	60L/min
Machine Size	L*W*H	5000*2800*2200mm
	Weight	4800kg
Auxiliary equipment preform unscrambler	L*W*H	2300*1500*2480mm
	Weight	350kg
Resin available		PET

Price Terms︰ FOB Shanghai

Payment Terms︰ T/T

Packing︰ Wooden cae

Lead Time︰ 20 Days

Product Image