BM-A6 automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water bottle, pesticide bottle, oil bottle, cosmetics bottle etc.
1. Features:
- Stable performance with advanced PLC.
- Conveying preforms automatically with conveyor.
- Strong penetrability and swift distribution of the heater by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
- Strong clamping force with high pressure and double crank links to lock the mold.
- Low cost, high efficiency, easy operation, easy maintenance, with automatic technological process.
- Ideal effect of the chilling with the chilling system.
- Easy installation and starting.
- Low rejection rate: less than 0.2 percent.
2. Full automatic control system:
- The machine adopts the high-end computers all actions central control.
- Material transport the use of sophisticated servo control, smooth, accurate, and fast.
- Raw material(pre-form) delivery sealed.
- Automatic lubrication system
- Scrap, defective automatically deleted election system
3. Energy saving：
- Bar distance and circuitous type pre-form carrier systems, energy saving 50﹪
- Free optimization thermal radiation, reduce waste, energy saving 20﹪
- The feeding and out bottle on the principle of gravity, reduce assistant action, the part of the save the compressed air 60﹪
- Out bottle system can directly connected filling machine, reduce unscramble bottle machine and human, save investment 16﹪
4. Technique Parameter of blow molding machine:
|
Main part:
|
|
Pneumatic part
|
Valve
|
SMC
|
|
Cylinder
|
|
Electric part
|
PLC
|
MITSUBISHI
|
|
Inverter
|
MITSUBISHI
|
|
Relay
|
OMRON
|
|
Servo motor National
|
MITSUBISHI
|
|
Note
|
All of the electrical components adopts CE、UL、CCC approved international advanced high-tech product.
|
|
Model
|
BM-A6
|
|
Productivity
|
Depend on bottle design
|
6000-7000PCS/H
|
|
Product type
|
Body diameter
|
≤90mm
|
|
Height
|
≤325mm
|
|
Neck diameter
|
28mm-30mm
|
|
Mold
|
Cavity
|
6 cavities
|
|
Mold thick
|
240mm
|
|
Main machine power
|
Electrical source power
|
380v 3Phase /220v 3Phase 50/60HZ
|
|
Rated Power
|
53kw
|
|
Really use power
|
24kw
|
|
Air source
|
LP air compressor
|
1.6m3/min 1.0MPa
|
|
HP air compressor
|
3.2m3/min 3.0MPa x 2
|
|
Air dryer
|
6.0m3/min 3.0MPa
|
|
Cooling water
|
Cooling water
|
60L/min
|
|
Machine Size
|
L*W*H
|
5000*2800*2200mm
|
|
Weight
|
4800kg
|
|
Auxiliary equipment preform unscrambler
|
L*W*H
|
2300*1500*2480mm
|
|
Weight
|
350kg
|
|
Resin available
|
|
PET
|
